NEWDINE series
Anti-Dyestuff Stain Type (NEWDINE T series)
Solvent Resistant Type (NEWDINE K series)
Newdine T and GT are permanent type table adhesive with Anti-Stain properties,
Newdine KH and KS are permanent type table adhesive with Solvent resistant properties.
Newdine series is a colorless or light yellow liquid. Upon drying, Newdine forms a durable resin film highly resistant to water chemicals, acids, detergents and printing pastes.
【Characteristics】
- Permanent table adhesive made of a thermoplastic resin.
- After coating Newdine the solvent dries out as a resin film with a strong adhesive power will form. This film has repellent and chemical resistance characteristics.
- Suitable for all screen printing systems and every kind of fabric.
- Economical because of its permanency (less labor and time).
- Adhesion power adjusts easily.
- Non-flammable.
- Adhesive power is uneffected by the washing of the printing table or blanket.
- Easily removed from any surface.
- Extremely workable and safe.
【Type】
NEWDINE T series (General type)
| Adhesive power | Anti-Kerosene | Anti-Stain | |
| NEWDINE T | standard | poor | excellent |
| NEWDINE GT | strong | poor | excellent |
NEWDINE K series (Anti-Kerosene type)
| Adhesive power | Anti-Kerosene | Anti-Stain | |
| NEWDINE KH | standard | excellent | moderate |
| NEWDINE KS | strong | good | moderate |
【Instructions for use】
Before coating :
Remove moisture, dirt, oil, etc. from the surfaces of printing tables, printing machines, digital printing machine bases, and belts. And clean them to ensure they are free of dirt.
How to coat :
The standard application amount is 150g to 200g/m2.
Apply thinly and repeatedly to the surface of the table or belt using a rubber squeegee or special application tool.
Dry :
After application, dry at room temperature for at least 30 minutes to evaporate the organic solvent.